Smit, ed: International Co-operation in Litigation: Europe

A Review of International Co-operation in Litication: Europe edited by Hans Smi

Therapeutic Education and Physical Activity to Support Self-management of Cancer-related Fatigue in Hematologic Cancer Patients: Protocol of a Feasibility Randomized Controlled Trial

Introduction: Hematologic malignancies account for nearly 8% of new cancer diagnosis in Italy. Cancer-related fatigue (CRF) is one of the most distressing symptoms reported by patients with cancer. As CRF has a multifactorial etiology, physical activity and therapeutic education may be beneficial for managing CRF, both during and after cancer treatment. However, there is a lack of evidence specific to hematologic malignancies. This paper describes the protocol of a feasibility study on Therapeutic Education and Physical Activity (TEPA) intervention to support self-management of CRF in patients with hematologic malignancies. Methods: TEPA was addressed to newly diagnosed adult individuals with hematologic malignancy able to take part in a rehabilitation programme at the AUSL-IRCCS of Reggio Emilia. The protocol was developed in 2 phases. Phase I was an observational cohort study involving a convenience sample of 10 participants with the aim to evaluate the feasibility of the assessment schedule and to register longitudinal clinical data regarding CRF (FACIT-F), psychologic distress (NCCN Distress Thermometer), QoL (EORTC QLQ-C30), physical performance (TUG and 6MWT) and habitual level of physical activity during first months after diagnosis. Phase II (underway) is a feasibility randomized controlled trial (TEPA) involving a convenience sample of 40 participants and comparing 2 parallel active interventions (Therapeutic Education versus Therapeutic Education and Physical Activity) on top of usual care. The primary aim is to estimate the feasibility of TEPA, measured by the adherence rate to the intervention. Secondary aims are: to estimate the effect size of TEPA in terms of changes in CRF, psychological distress, QoL, physical performance and habitual level of physical activity (measured as in Phase I); to collect patient satisfaction, perception of usefulness of the TEPA intervention and data on long-term adherence to an active lifestyle. Data are collected in both phases at the time of diagnosis and then at 1-, 3- (completion of intervention) and 7-month follow-up. Discussion: Data on feasibility and effect size of TEPA will be analyzed upon completion of Phase II, allowing us to design a large, adequately powered RCT to verify the effectiveness of this intervention on CRF management in patients with hematologic cancer. Trial registration: clinicaltrials.gov; Trial registration number: NCT0340307

Tamoxifen exacerbates morbidity and mortality in male mice receiving medetomidine anaesthesia

Tamoxifen-induced CreER-LoxP recombination is often used to induce spatiotemporally controlled gene deletion in genetically modified mice. Prior work has shown that tamoxifen and tamoxifen-induced CreER activation can have off-target effects that should be controlled. However, it has not yet been reported whether tamoxifen administration, independently of CreER expression, interacts adversely with commonly used anaesthetic drugs such as medetomidine or its enantiomer dexmedetomidine in laboratory mice (Mus musculus). Here, we report a high incidence of urinary plug formation and morbidity in male mice on a mixed C57Bl6/J6 and 129/SvEv background when tamoxifen treatment was followed by ketamine-medetomidine anaesthesia. Medetomidine is therefore contra-indicated for male mice after tamoxifen treatment. As dexmedetomidine causes morbidity and mortality in male mice at higher rates than medetomidine even without tamoxifen treatment, our findings suggest that dexmedetomidine is not a suitable alternative for anaesthesia of male mice after tamoxifen treatment. We conclude that the choice of anaesthetic drug needs to be carefully evaluated in studies using male mice that have undergone tamoxifen treatment for inducing CreER-LoxP recombination

Therapeutic education and physical activity are feasible and safe in hematologic cancer patients referred to chemotherapy: results of a randomized controlled trial

Purpose: Although over 60% of patients with hematologic cancer report distressing fatigue, they often do not receive recommendations on fatigue management strategies. The aim of this pilot study was to estimate the feasibility of therapeutic education and physical activity (TEPA) by measuring the patients’ adherence to this multidimensional intervention. The secondary aim was to estimate the impact of TEPA on clinical outcomes. Methods: Patients with hematologic cancer participated in this single-center, open-label, randomized controlled trial. The control group (CG) received two educational group sessions on fatigue and physical activity. The experimental group (EG) received the two educational sessions plus six weekly individual sessions aimed at implementing a personalized physical exercise program. Follow-ups were at 1, 3, and 7 months. Results: Forty-six patients referred to chemotherapy were included, corresponding to 54% of recruitment rate. Adherence reached 90% in the EG and 68% in the CG. Most patients (65% in EG and 64% in CG) attended a minimum of 80% of the planned sessions. Overall retention rate was 87% (85% in EG and 91% in CG). No adverse events were registered. No between-group differences were detected in fatigue (FACIT-F), psychological distress (NCCN Distress Thermometer), QoL (EORTC QLQ-C30), or functional exercise capacity (TUG test and 6MWT). Adherence to an active lifestyle, measured by a semi-structured interview, increased from 56.5 to 84% in the EG at 7 months (p = 0.02), whereas it decreased slightly in the CG (from 47.8 to 42.9%). Conclusion: Multidimensional rehabilitation interventions are feasible and safe in this population, and larger trials should focus on the efficacy of such approaches on clinically relevant outcomes. Trial registration: ClinicalTrials.gov Identifier: NCT03403075

Technological Feasibility of Lattice Materials by Laser-Based Powder Bed Fusion of A357.0

Lattice materials represent one of the utmost applications of additive manufacturing. The promising synergy between additive processes and topology optimization finds full development in achieving components that comprise bulky and hollow areas, as well as intermediate zones. Yet, the potential to design innovative shapes can be hindered by technological limits. The article tackles the manufacturability by laser-based powder bed fusion (L-PBF) of aluminum-based lattice materials by varying the beam diameter and thus the relative density. The printing accuracy is evaluated against the distinctive building phenomena in L-PBF of metals. The main finding consists in identification of a feasibility window that can be used for development of lightweight industrial components. A relative density of 20% compared with fully solid material (aluminum alloy A357.0) is found as the lowest boundary for a 3-mm cell dimension for a body-centered cubic structure with struts along the cube edges (BCCXYZ) and built with the vertical edges parallel to the growth direction to account for the worst-case scenario. Lighter structures of this kind, even if theoretically compliant with technical specifications of the machine, result in unstable frameworks

Farmaci orfani e malattie rare: un confronto internazionale delle normative di riferimento

Orphan drugs are defined as medicines with low economic returns, so that their production is not a profitable business far pharmaceutical companies. The present study analyses the main characteristics and the role of orphan drugs in four countries (United States of America, .Japan, Australia and European Union), by considering the regulation and the market situation of each State. All countries have introduced a specific legislation on orphan drugs to stimulate the research activity of pharmaceutical industry. The first law was the Orphan Drug Act of the United States of America in 1982. A common limit of all regulations is the strict correlation between “orphan drugs” and “rare diseases”. In fact, the term “orphan” does not refer only to rare disease, but also to other elements that can determine low economic returns for the industry (e.g. drugs with high cost of research and development, drugs that cannot be patented)

effects of a natural extract of chestnut wood on digestibility performance traits and nitrogen balance of broiler chicks

Currently, feed ingredients containing tannin are attracting more interest as substitutes for antibiotic growth promoters in animal and poultry feeding. This study investigated the influence of a natural extract of chestnut wood (Silvafeed ENC) on broiler digestibility (experiment 1) and on the growth performance, carcass quality, and nitrogen balance of broilers (experiment 2). Results showed that the inclusion of ENC did not influence the apparent digestibility of organic matter, CP, and ether extract. Chick growth performance showed a quadratic or cubic response with increasing levels of ENC. When chicks were fed ENC from 14 to 56 d of age, the ENC had a positive effect on average daily gain in the first 2 wk of addition, whereas this effect was not evident in the last 2 wk compared with the control group. Similar trends were also shown for daily feed intake. Overall, the chicks fed 0.20% ENC had significantly better growth performance than the control group. Carcass analysis showed no gross lesions in organs and no significant differences in thigh and breast composition among groups. Noteworthy is the fact that the ENC-treated groups had less total litter nitrogen; in particular, chicks fed 0.15 and 0.20% ENC showed a significant difference in total litter nitrogen compared with the control group. No significant difference in nitrogen balance was observed. Addition of 0.20% ENC seemed to have a positive influence on chick feeding

Self-management in stroke survivors: Development and implementation of the look after yourself (lay) intervention

Objective: Self-management is recommended in stroke rehabilitation. This report aims to describe timing, contents, and setting of delivery of a patient-centered, self-management program for stroke survivors in their early hospital rehabilitation phase: the Look After Yourself (LAY) in-tervention. Methods: After extensive literature search, the LAY intervention was developed by in-tegrating the Chronic Disease Self-Management Program, based on the self-efficacy construct of social cognitive theory, with evidence-based key elements and input from stroke survivors. Results: the LAY intervention aims to implement self-management skills in stroke survivors, enabling them to be active in goal setting and problem solving using action plans and to facilitate the critical transition from hospital to community. It includes both group sessions to facilitate sharing of experi-ences, social comparison, vicarious learning, and increase motivation and one-to-one sessions fo-cused on setting feasible action plans and on teaching personalized strategies to prevent falls. Stand-ardization is ensured by manuals for facilitators and patients. Conclusion: The LAY intervention is the first Italian program to support early self-management in stroke rehabilitation; it has been ex-perimented and its efficacy proven in improving self-efficacy, mental health, and activities of daily living, and detailed results have been published. The LAY intervention is described according to the TIDieR checklist

Manufacturing of PAV-ONE, a Permeator against Vacuum Mock-Up with Niobium Membrane

The Permeator Against Vacuum (PAV) is one of the proposed technologies for the Tritium Extraction System of the WCLL BB (Water-Cooled Lithium-Lead Breeding Blanket) of the EU DEMO reactor. In this paper, the manufacturing of the first PAV mock-up with a niobium membrane with a cylindrical configuration is presented. This work aimed to demonstrate the possibility of manufacturing a relevant-size PAV to be later tested in the TRIEX-II facility. The adopted prototypical solutions are described in detail, starting with the methodology developed to join the Nb tubes with a 10CrMo9-10 (A182 F22) plate. Dedicated manufacturing and welding procedures, based on vacuum brazing with a nickel-based brazing alloy, were developed to solve the problem. This new kind of brazing was first analyzed to check the morphology of the joint and then tested to check its capability to withstand the TRIEX-II operative conditions. In parallel, the compatibility with a lithium-lead environment was analyzed by exposing samples of niobium and 10CrMo9-10 (A335 P22) to a flow of the eutectic alloy at 500 °C up to 4000 h. Finally, the PAV mock-up was installed in the TRIEX-II facility